A central function of the software is the fully automatic creation and plotting of plans for production and the construction site. Depending on the type of prefabricated part, various planned outputs are available. These can look different if you take into account the special information requirements of the respective finished parts.

In general, the following information is included as standard on a production plan:

• Multiple views of the element with the corresponding dimension lines for dimensioning and placement of openings, built-in parts and reinforcement
• A list of the built-in parts used in the component
• A list of the reinforcing positions used with corresponding position numbers in the list and on the reinforcing ridges in the views
• Bending sketches of all bending shapes used in the component
• Stamp field with information about the associated order (order number, address information, etc.)
• Component number
• Component weight
• Area of ​​the component (wall and ceiling)
• Concrete volume
• Concrete grade
• Concrete cover
• Steel grade
• Additional freely definable information (detailed drawings, comments, notes, etc.)
• Fully associative sections through the component (including reinforcement representation and dimensions)

The laying plan for the construction site is also generated fully automatically. The program determines the appropriate paper format based on the project size, the scale set and the plotter's available paper formats. The installation plan is then created according to the parameters set in the program configuration.

The following information is available:

• A top view of the floor with the position of all components as well as a complete floor plan measurement
• A steel list including bending sketches for the on-site reinforcement
• A 3D view of the model
• Stamp field with information about the associated order (order number, address information, etc.)
• Additional freely definable information (detailed drawings, comments, notes, etc.)
• A complete wall development with dimensions

The layout of the plans is configurable. You can also define the paper format in which the plans are created and whether they should be displayed in portrait or landscape format. If desired, the information from a production plan can also be distributed across several plans: e.g. element plan with the contour of the component, reinforcement plan and built-in component plan.

‍